ZyXEL Communications SBG3300-N series User Manual page 106

Chapter 7 LAN
Click Apply to save your settings.
3
Figure 54 Network Setting > LAN > LAN Setup
The following table describes the fields in this screen.
Table 33 Network Setting > LAN > LAN Setup
LABEL
Interface Group
Group Name
Zone
LAN IP Setup
IP Address
Subnet Mask
IGMP Snooping
Status
106
DESCRIPTION
Select the interface group name for which you want to configure LAN settings. See
12 on page 169 for how to create a new interface group/VLAN.
Select the security zone (LAN, WLAN, DMZ, or EXTRA) in which to include the LAN
interface. A newly created local network (interface group) belongs to the LAN zone by
default.
Enter the LAN IP address you want to assign to your Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP Address you enter, so do not change this field unless you are instructed to
do so.
Select the Enable IGMP Snooping check box to allows the Device to passively learn
multicast group.
Chapter
SBG3300-N Series User's Guide