Mitsubishi Electric MELSEC Q Series User Manual page 89

(b) For the Built-in Ethernet port QCPU
1
Memory card *
*1: Do not format the ATA card by other than GX Developer.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
*2: For writing into memory card by GX Developer and information on USB cables, refer to the operating manual of the GX
Developer.
*3: The available version varies depending on the system configuration. (
*4: Use the following Ethernet cables:
• 10BASE-T connection: Cables compliant with Ethernet standards, category 3 or higher (STP/UTP cables)
• 100BASE-TX connection: Cables compliant with Ethernet standards, category 5 or higher (STP/UTP cables (In an
environment subject to electric noise, use shielded twisted pair (STP) cables.))
2 - 41
Memory card *
PC card adapter
Figure 2.27 Configuration of peripheral devices
Universal model QCPU
1
PC(GX Developer, GX Configurator) *
Ethernet cable*
3
USB cable *
Section 2.3)
4
2