When Cpu No.1 Is Basic Model Qcpu - Mitsubishi Electric MELSEC Q Series User Manual

3.1.1 When CPU No.1 is Basic model QCPU

The mounting position of each CPU module is shown in Table3.2.
(1) Mounting position of Basic model QCPU
Only one Basic model QCPU can be mounted on the CPU slot (slot on the right-hand side of the power supply
module) of the main base unit.
(2) Mounting position of Motion CPU
Only one Motion CPU can be mounted to slot 0 on the right of the Basic model QCPU.
It cannot be mounted to other than slot 0.
(3) Mounting position of PC CPU module
Either one of the PC CPU module can be mounted on the right edge of the CPU module.
(No CPU module can be mounted on the right side of the PC CPU module.)
Figure 3.1 Position where the PC CPU module cannot be mounted when using the Motion CPU
(a) When mounting the Motion CPU
• The PC CPU module can be mounted on slot 1 or 2.
• The C Controller module can be mounted on slot 1
(b) When not mounting the Motion CPU
• The PC CPU module can be mounted on slot 0 or 1.
• The C Controller module can be mounted on slot 0
3 - 2
CPU 0 1 2 Slot number