Mitsubishi Electric MELSEC Q Series User Manual page 137

(2) Access to controlled module and non-controlled module
GX Developer can access the modules regardless of whether they are controlled or non-controlled by the QCPU
connected to the GX Developr.
By connecting GX Developer to a single QCPU, it is possible to perform monitoring and tests on all modules
being controlled by the multiple CPU system's QCPU.
The QCPU on another station in the same CC-Link IE controller network
or Ethernet network can also be
íç1
High
Note3.3
performance
The CC-Link IE controller network can only be used with the High Performance model QCPU whose first serial number
is 08102 or later.
Note3.4 Basic
The CC-Link IE controller network cannot be used with the Basic model QCPU and the Process CPU.
3 - 32
accessed.íç1
CPU 0
1 2
Access allowed
Figure 3.32 Access to controlled module and non-controlled module
Process
Slot number
1 2 3 4
1 1 2 2 Control CPU setting
, MELSECNET/H
Note3.3, Note3.4