Panel User Interface; Timecode; Serial Port; Hardware Conversion - AJA Ki PRO rack Operation Manual

Panel User Interface

Timecode

Serial Port

Hardware Conversion

Up-conversion - 10-bit
Anamorphic:
Pillar box 4:3:
Zoom 14:9:
Zoom Letterbox:
Zoom Wide:
Down-conversion - 10-bit
Anamorphic:
Letterbox:
Ki Pro Rack v4.2
• 2 x 20 character display, with dedicated buttons
• LTC timecode input and output via BNC
• SDI embedded RP188 timecode
• Onscreen timecode display on SDI 2 output
RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)—Connector
pinout is as follows:
1 GND
2 TX -
3 RX +
4 GND
5 No Connection
6 GND
7 TX +
8 RX -
9 GND
Shell GND
Full-screen
Results in a 4:3 image in center of screen with black sidebars
Results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
Image zoomed to fill screen
Combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce
a small aspect ratio change
Full-screen
Image is reduced with black top and bottom added to image area with the aspect ratio
preserved
Crop: Image is cropped to fit new screen size
:
89 www.aja.com