System Name; Mac Address; User Authentication - AJA Ki PRO rack Operation Manual

50.5 SYSTEM NAME

50.6 MAC ADDRESS

50.9 USER
AUTHENTICATION
Ki Pro Rack v4.2
This parameter defines a name for Ki Pro Rack and gives it a unique identifier. This same
name is used both when displaying systems via the web interface and for display on Ki
Pro Rack's screen saver (if System name is chosen in Parameter 70.1 Screen Saver). These
are the available options:
variable
This parameter is an information-only field showing the MAC address of the Ki Pro Rack's
ethernet adapter. These are the available options:
information only display
This parameter enables or disables an authentication login requirement when using the
web UI. By default this parameter is set to Disabled.
If you select Login via the front panel interface and then you attempt to use the web UI
interface, you will be asked for a login password. The web browser will present the login
screen requesting that a password be entered before you can access any other parameter
or configuration screen.
The password is initially set to the default value: password.
If you select Login for the User Authentication parameter via the web UI, you may enter a
user selected password. As long as the menu parameter is not changed to Disabled, the
password requirement will remain in effect. Any time the web UI is accessed, the login
password will be requested before additional access to any other web UI parameter or
configuration screen will be granted. If you enter a user selected password, be aware that
this password will be retained and you will need to remember the password. If the user
entered password is forgotten, you may clear it by performing a Hard Factory Reset.
NOTE: A standard Factory Reset does not clear the user entered password. To perform a Hard Factory
Reset, enter the 99.0 Factory Reset parameter, and unlike a typical Factory Reset where only
the ADJUST (up) button is held for 2 seconds, hold both the ADJUST (up) and the ADJUST
(down) buttons simultaneously for 2 seconds.
Using the Adjust buttons, enter a name for Ki Pro Rack. Using
the Adjust buttons and the top Select button, select the
characters for each of the up to 20-character name. The
Adjust buttons scroll through the choices and the top
Select button advances to the next character. While
selecting characters, the character being changed will flash
to show its position. The character set allowed is: 0 through
9, '-' , ' . ' , A through Z (uppercase) and a through z (lowercase).
Default: AJA Ki Pro
Selecting this parameter allows you to view Ki Pro Rack's
ethernet MAC address. The MAC address is a unique value
associated with the internal ethernet network adapter.
MAC addresses are also known as hardware addresses or
physical addresses. MAC addresses uniquely identify an
ethernet adapter on a LAN.
MAC address format: MM:MM:MM:SS:SS:SS
The value is 12-digit hexadecimal, where the first half
identifies the manufacturer and the second half identifies
the unique serial number.
59 www.aja.com