Playback Of A Playlist; Using Presets; Storing A Preset - AJA Ki PRO rack Operation Manual

Playback of a Playlist

Using Presets

Storing a Preset

Ki Pro Rack v4.2
If you want to play a playlist you have created, first select Play Media>Playlist in the
Media menu parameters. (Note: depending on whether you have been reviewing clips,
you may first be prompted to "Press Stop" prior to entering the Media page to make
Playlist selections; if this prompt appears, you will be led to the Transport page where
you can depress stop and then enter the Media page.)
Figure 25. Ki Pro Rack Web Interface, Playing Back a Playlist
Select a playlist from the Playlist parameter in the Media menu. Once a playlist is
selected, you will noticed that a double arrow indication will appear next to the selected
list in the Playlists portion of the web UI. If you go to the Transport portion of the web UI,
you will now notice that the playlist is cued up, ready for playback of the first clip in the
list. If you want to navigate within your list, you may use the fast forward and rewind
buttons or the select up/down buttons. You can loop playback of a list using the Media
menu parameters as well.
Management of the Playlists is made possible via the web UI; creation and management
of playlists from the front panel is not supported. An indication of a selected playlist is
presented on the front panel UI via menu parameter 15.3 Playlist. The selection of a
playlist does not survive reboots of the unit, but the playlists that are created do survive
reboots.
Beginning with version 3.0 firmware, Ki Pro Rack offers a simple and efficient way to
configure multiple parameters of the device from a preset. You can store a preset
configuration and then recall that preset later to return Ki Pro Rack to the stored
configuration.
The easiest way to work with presets is via the web UI. A Presets web UI page is provided
where 20 customizable presets are offered.
83 www.aja.com