AJA Ki PRO rack Operation Manual page 85

Figure 28. Ki Pro Rack Web Interface, Recalling a Preset
You can also export a preset file to your computer or import a preset file from your
computer.
NOTE: AJA recommends that presets only be used between the same types of devices. In other
words, only use presets from Ki Pro Racks with other Ki Pro Racks, not with Ki Pro Minis.
At any time you may perform a recall of the Factory Settings if you have presets enabled.
IMPORTANT: Presets do survive reboots of the device. If you want to be sure that your device does not
have someone else's settings in place, you can perform a recall of Factory Settings prior
to configuring and working with the Ki Pro Rack.
While the web UI is the preferred method of working with presets, they may also be
saved and recalled from the front panel UI. Important: custom naming of presets is not
possible from the front panel UI; presets will have their default names of "Preset 1," Preset
2, " etc. To recall a preset from the front panel UI, navigate to CONFIG menu parameter
91.1 Recall Preset. Use the ADJUST up/down buttons to select a preset. Use the SELECT
up button to choose a specific preset and the ADJUST up button to recall the preset. To
abort recalling a preset, press the select down button.
To save a preset, navigate to CONFIG menu parameter 92.1 Store Preset. Use the ADJUST
up/down buttons to select a preset. Use the SELECT up button to choose a specific preset
and the ADJUST up button to store the Preset. To abort recalling a preset, hit the select
down button. Hint: in both CONFIG menu parameters 91.1 and 92.1, you can tell if you
are navigating through the presets if you see the leading numeric characters flashing.
Again, use the SELECT down button to exit these menu parameters.
For ease-of-use, AJA strongly recommends using the web UI to work with presets; more
options are also available when using the web UI.
Ki Pro Rack v4.2 85 www.aja.com