AJA Ki PRO rack Operation Manual page 66

Interval Frames (9.1):
Interval Time (9.2):
Camera Data (13.1):
Loss of Video (32.0):
Remote Control (35.2):
Video SG Format (41.1):
Video SG (41.2):
Audio SG (41.3):
System Name (50.5):
User Authentication (50.9):
Date Set (55.4/55.6):
Screen Saver (70.1):
Display Intensity (70.2):
Fan Speed (70.3):
Ki Pro Rack v4.2
This parameter determines how many frames from the incoming video will be used for
the recording.
This parameter determines the time period from which the interval frames are selected.
This parameter controls the use of camera-generated ancillary data. Some cameras
produce ancillary data that Ki Pro Rack users may want to transfer to their recordings.
Examples include: start/stop commands, timecode, reel name, clip name and take. If a
selection other than "NONE" is selected, and an appropriate camera is present—and
sending appropriate ancillary data—then the metadata available from the camera will
be passed into the Ki Pro Rack's timecode value, file name, and other applicable
parameters. Please read the discussion on Config Parameter 13.1 "Camera Data" in Chapter 3
for additional information.
This parameter selects whether recording continues when valid video is not present.
Enables or disables Ki Pro Rack remote control by an external device. With the RS422
selection, an external RS422 controller or an NLE may be used to control the Ki Pro Rack.
The CONFIG menu parameter 8.0 TC IN is set automatically to correspond to the RS422
Only. When the 8.0 TC IN is set to RS422, it allows Ki Pro Rack to accept an RS422 in-point
timecode value as the beginning timecode value for the recording. Example: the value
01:00:00:00 is received as the in-point; this becomes the first frame of the Ki Pro Rack
recording.
Operation is described in Chapter 3 under Config Parameter 35.2, Remote Control.
This parameter determines the video format output from Ki Pro Rack's internal test signal
generator.
This parameter determines the video signal output from Ki Pro Rack's internal test signal
generator. This parameter is used with parameter above (41.1) to determine the type of
video test signal output by Ki Pro Rack.
This parameter determines the audio signal output from Ki Pro Rack's internal test signal
generator (OFF, silence, or 1 kHz tone).
This parameter defines a name for Ki Pro Rack and gives it a unique identifier. This same
name is used both when displaying systems via the web interface and for display on Ki
Pro Rack's screen saver (if System name is chosen in Parameter 70.1 Screen Saver).
This parameter enables or disables an authentication login requirement when using the
web UI.
This parameter manually sets the calendar date and time of the internal Ki Pro Rack clock.
Edit the date and time fields and then click Apply to set the date and time.
When set to "AJA Logo", a rolling AJA logo screen saver will appear on the alphanumeric
display after 3 minutes of inactivity—defined as no button presses on the front panel.
This parameter determines the brightness of the alphanumeric display and front backlit
buttons.
This parameter determines the speed of Ki Pro Rack's internal cooling fan. In some
environments where audio recording is occurring close to the Ki Pro Rack unit, it may be
desirable to set the fan speed to "QUIET AUTO" or "QUIET RECORD".
66 www.aja.com