AJA Ki PRO rack Operation Manual page 27

Figure 7. Configuring Ki Pro with a Static IP Address
NOTE: For parameters 50.2, 50.3, and 50.4, you will be setting IP addresses that consist of "octets"
separated by a period (i.e., 10.0.180.0). For these parameters, the Select button selects the
octet and then the Adjust buttons select the desired number. Pressing Select again advances
to the next octet. At the final octet, the address will flash—pressing Select at that point
confirms the setting.
Ki Pro Rack v4.2 27 www.aja.com