Use Custom Clip Name; Custom Clip Name; Custom Take; Gang Clip Name - AJA Ki PRO rack Operation Manual

IMPORTANT:
19.1 USE CUSTOM CLIP
NAME
19.2 CUSTOM CLIP
NAME

19.4 CUSTOM TAKE

22.1 GANG CLIP NAME

Ki Pro Rack v4.2
Certain characters may not be allowed or supported if entered for a clip name. Examples
include: punctuation marks (other than internal spaces or periods), special characters (like @),
and non-ASCII UTF-8 characters are rejected outright. Note: non-UTF-8 characters appear in
some languages, like Chinese and Japanese, and are not supported.
This parameter enables or disables whether a custom clip name can be used via menu
parameters 19.1, 19.2, and 19.4, or via the web UI. These are the available options:
OFF (default)
ON
This parameter defines a custom clip name. The custom clip name is defined via the front
panel select and adjust up/down arrows. The default name is "CUSTOM".These are the
available options:
variable
This parameter defines a custom take. The custom take number is defined via the front
panel select and adjust up/down arrows. These are the available options:
1 to 999 (default = 1)
This parameter is used when performing gang recording via multiple Ki Pros (refer to
Controlling Multiple Ki Pros later in this manual). These are the available options:
Master Name (default)
Slave Name
If the desire is to have clips named the same across all Ki Pro ganged units' recordings,
then use the "Master Name" selection in this parameter. If the desire is to have clips
named independently on Ki Pro units, then "Slave Name" should be selected. Selecting
"Slave Name" means that the recording will take it's name from the individual Ki Pro's
parameters and not accept the value pushed to the Slave by the Master Ki Pro.
Enable defining of custom clip name
Disable defining of custom clip name
Using the adjust buttons, enter a custom clip name. Using the
adjust buttons and the top Select button, select the
characters for the name. The adjust buttons scroll through
the choices and the top Select button advances to the next
character. While selecting characters, the character being
changed will flash to show its position. Certain characters
may not be allowed or supported if entered for a clip
name. Examples include: punctuation marks (other than
internal spaces or periods), special characters (like @),
and non-ASCII UTF-8 characters are rejected outright.
Note: non-UTF-8 characters appear in some languages,
like Chinese and Japanese, and are not supported.
Default: CUSTOM
Press ADJUST button up or down to change the TAKE value
from 1 to 999, if a value other than the automatically
generated value is desired.
Name clips the same across all Ki Pro ganged units
Name clips independently on Ki Pro units
42 www.aja.com