Genlock; Tc In - AJA Ki PRO rack Operation Manual

6.1 GENLOCK

8.0 TC IN

Ki Pro Rack v4.2
Figure 9. Downconversion Illustrations
16:9 Downconverts To
1 6
This parameter selects a source of reference video used for genlocking during playback.
Ki Pro Rack always genlocks to the selected input during capture. These are the available
options:
INPUT
CMP Y
FREERUN (default)
REF IN
This parameter selects the source of timecode start from those available. These are the
available options:
TC VALUE (default)
SDI RP188
LTC
TIME OF DAY
RS422
HDMI
NOTE: Ki Pro Rack, when used with select Sony cameras, only works with HDMI timecode matched to
the recording format and HDMI output: 1080i 29.97 (1080i 59.94) or 1080i 25 (1080i 50). If a
1080p 24 recording on the Sony camera's internal media with a 1080i 29.97 HDMI output is
produced, the Ki Pro Rack may not respond to HDMI timecode as expected.
Letterbox
9
Crop
Anamorphic
Use the currently selected input as the Genlock source
Use component Y as the genlock source
Free run mode: Ki Pro syncs to its own timebase and is not
locked to an external source
Use the REF Input as the genlock source
Use the value specified in parameter 8.1 TC VALUE
Use the timecode read from the embedded RP188 metadata
in the SDI input
Use timecode from the LTC input connector
Set TC to "Time of Day" clock (CONFIG parameter 55.6)
RS422 in-point TC value is used for the start value of a
recording (presented only if 35.2 is set to RS422 Only)
Use timecode from HDMI input (Sony cameras only)
50
These displays on 4:3
4
3
www.aja.com