Table of Contents
Advertisement
A-96
Network
Panel User Interface
Timecode
Serial Port
Hardware up-conversion - 10-bit
Hardware down-conversion - 10-bit
Hardware cross-conversion - 10-bit
10/100/1000 Ethernet (RJ45)
Embedded webserver for remote control
2 x 20 character display, with dedicated buttons
LTC timecode input and output via BNC
SDI embedded RP188 timecode
Onscreen timecode display on SDI 2 output
RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)—
pinout is as follows:
1 GND
2 TX -
3 RX +
4 GND
5 No Connection
6 GND
7 TX +
8 RX -
9 GND
Shell GND
Anamorphic: full-screen
Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars
Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
Zoom Letterbox: image zoomed to fill screen
Zoom Wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can
introduce a small aspect ratio change
Anamorphic: full-screen
Letterbox: image is reduced with black top and bottom added to image area with the
aspect ratio preserved
Crop: image is cropped to fit new screen size
1080i to 720P
720P to 1080i
Connector
Advertisement
Table of Contents
