Presets Screen - AJA Ki PRO rack Operation Manual

Show Gang View:

Presets Screen

Ki Pro Rack v4.2
SLOT: This button serves two purposes. First, it selects which storage slot is accessed by the
system. Second, the SLOT button is used to unmount a currently selected piece of media.
Caution!
Not using the SLOT button to unmount media before removal can cause problems
with the files stored on that media.
Pushing the SLOT button cycles between unmounting media and selecting media. This
function is only active when in the "STOP" mode and requires a "PRESS STOP TO
CONFIRM" if not stopped. After you select a slot, the system returns to the last selected
clip and timecode for that slot. If the media has been changed since the slot was last
selected (physically removed/media replaced), then the "first" clip on the media will be
"cued" to its start point. If inserted media has any issues, additional prompts may be
displayed as appropriate such as: "WARNING FRMT MEDIA" or "WARNING MEDIA LOW. "
When clicked, the Transport screen expands at the bottom to show controls for
controlling multiple Ki Pros. See
for an additional tutorial on using this feature.
Figure 14. Ki Pro Rack Web Interface, Transport Screen Gang View
The Presets screen allows you to save Preset Configurations into 20 separate memory
registers and recall the presets whenever needed. This screen also includes Export and
Import functions that allow exporting one or all presets to your computer as files and
importing exported preset files from your computer. A displayed message indicates
successful or failed saves, recalls, exports, and imports.
"Gang Recording" on page 78
70
at the end of this chapter
www.aja.com