Network; Panel User Interface; Timecode; Control - AJA Ki PRO Installation And Operation Manual

Network

Panel User Interface

Timecode

Control

Serial Port

FireWire

Ki Pro v3.2
• 10/100/1000 Ethernet (RJ45)
• 802.11b/g wireless transceiver
• Embedded webserver for remote control
• 2 x 20 character display, with dedicated buttons
• LTC timecode input and output via BNC
• SDI embedded RP188 timecode
• LANC Loop (2 LANC connectors)—not supported prior to Version 3.0
• Lens Tap: connects to optional AJA Lens Tap intercept cable placed between camera
body and lens for start/stop control—not yet supported by firmware.
• IEEE-1394a/FireWire 400 for control and timecode data, not supported prior to v 3.0
RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware).
pinout is as follows:
1 GND
2 TX -
3 RX +
4 GND
5 No Connection
6 GND
7 TX +
8 RX -
9 GND
Shell GND
IEEE-1394b, FireWire™ 800Mb/s connects to FireWire 800-equipped Macintosh
computers (mount as hard drive)—not supported prior to Version 3.0
104
Connector
www.aja.com