Table 8: Ucm6104 Network Settings->Basic Settings - Grandstream Networks UCM6102 User Manual
Ip pbx appliance
Hide thumbs
Also See for UCM6102:
- User manual (308 pages) ,
- Basic configuration manual (21 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
Default Interface
IP Method
IP Address
Gateway IP
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
Method
Preferred DNS Server
LAN (when Method is set to "Switch")
IP Method
IP Address
Gateway IP
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
Firmware Version 1.0.1.22
If "Dual" is selected as "Method", users will need assign the default interface to
be LAN 1 (mapped to UCM6102 WAN port) or LAN 2 (mapped to UCM6102 LAN
port) and then configure network settings for LAN1/LAN2. The default interface
is LAN 1.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
Enter the subnet mask address for static IP settings. The default setting is
255.255.0.0.
Enter the DNS server 1 address for static IP settings. The default setting is
0.0.0.0.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Table 8: UCM6104 Network Settings->Basic Settings
Select "Switch" or "Dual" mode on the network interface of UCM6104. The
default setting is "Switch".
•
Switch
LAN 1 port interface will be used for uplink connection. LAN 2 port interface
will be used as bridge for PC connection.
•
Dual
Both ports can be used for uplink connection. Users will need assign the
default interface in option "Default Interface".
Enter the preferred DNS server address.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
Enter the subnet mask address for static IP settings. The default setting is
255.255.0.0.
Enter the DNS server 1 address for static IP settings. The default setting is
0.0.0.0.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
UCM6102/6104/6108/6116 USER MANUAL
Page 28 of 138
Advertisement
Table of Contents
