When First Applying Power (Cpu Resetting); Initial Settings - Icom IC-R9500 Instruction Manual

3
BASIC OPERATIONS

■ When first applying power (CPU resetting)

[Power indicator]
[POWER]

■ Initial settings

[AGC]: 12 o'clock
[SQL]
: Max. counter clockwise
[NOTCH1]/[NOTCH2]
: 12 o'clock
[AF]
: Max. counter clockwise
[RF]: Max. clockwise
Before first applying power, make sure all connections
required for your system are complete by referring to
Section 2. Then, reset the receiver using the following
procedure.
[I/O]
q Turn the main power ON with [I/O] on the rear
w While pushing and holding [CE] and [M-CL], push
[CE] [M-CL]
e Change the set mode settings after resetting, if de-
After resetting the receiver, set controls as shown in
the figure below.
[NB LEVEL]
: Max. counter clockwise
[TREBLE]/[BASS]: 12 o'clock
3-2
Resetting CLEARS all programmed contents in
memory channels and returns programmed values
in set mode to default values.
panel.
• The receiver power is still OFF and the [POWER] indi-
cator lights orange.
[POWER] to turn power ON.
• The CPU is reset.
• The CPU start-up takes approx. 5 sec.
• The receiver displays its initial VFO frequencies when
resetting is complete.
sired.
In cooler temperatures, the LCD may appear dark
and unstable after turning power ON. This is normal
and does not indicate any equipment malfunction.
[NR LEVEL]
: Max. counter clockwise