Setting A Frequency; I Turning Power On/Off; I Mode Selection - Icom IC-R1500 Instruction Manual

I Turning power ON/OFF

➥ Push [PWR] for 1 sec. to turn power ON and OFF.

I Mode selection

D VFO modes
VFO mode is used for the desired frequency setting within the
frequency coverage.
➥ Push [V/MHz•SCAN] to select VFO mode.
[V/MHz•SCAN]
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for receiving are generated and controlled by the
VFO.

SETTING A FREQUENCY

D Memory mode/Weather channels*
Memory mode is used for operation of memory channels
which have programmed frequencies. Weather channels* are
monitored each 5 sec. when the weather alert function is
turned ON.
[PWR]
*Available for the USA version only.
qPush [MR•SKIP] several times to select the channel type.
• Memory mode/Weather channels can be selected in sequence.
• "!" indicator appears when memory mode is selected.
w Rotate [DIAL] to select the desired channel.
• Only programmed memory channels can be selected.
• See p. ?? for memory programming details.
[MR•SKIP]
[DIAL]
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6