Setting A Frequency; Turning Power On/Off - Icom IC-R2500 Instruction Manual

3

SETTING A FREQUENCY

■ Preparation
D Turning power ON/OFF
Push [PWR] for 1 sec.
➥ Push [PWR•
] for 1 sec. to turn power ON and OFF.
D MAIN band
The IC-R2500 can receive 144 MHz and 430(440) MHz band
signals simultaneously.
Push the desired band's
[MAIN]
➥ Push the desired band's [MAIN•AGC] to select the main
band.
• "Q" indicates the main band.
9
D VFO and memory modes
The receiver has 2 basic operating modes: VFO mode and
memory mode. Select VFO mode first to set an operating fre-
quency.
[VFO/MR¥S.MW]
! indicator appears when
memory mode is selected
➥ Push the desired band's [VFO/MR•S.MW] to select VFO
mode.
➥ Push [VFO/MR•S.MW] again to select memory mode.
• "!" indicator appears when memory mode is selected.