Scan Set Mode - Icom IC-R9500 Instruction Manual

8
SCANS

■ Scan set mode

[F-1•Y] [F-2•Z] [F-4•DEF] [EXIT/SET] Main dial
SKIP Function
Select the skip scan function ON or OFF.
Auto MW SCAN Memory Clear
Set the clearing condition for the auto memory write
scan's memories channels.
Auto SCAN Screen (SCAN Start)
Set the automatic scan screen ON function when
starting a scan.
This set mode is used to set the skip scan setting,
memory clear condition for auto memory write chan-
nels and appearing scan screen setting.
q Push [F-5•SCAN] to select scan screen.
w Push [F-7•SET] to select scan set mode.
e Push [F-1•Y] or [F-2•Z] to select the desired item.
r Rotate the main dial to select the desired condition.
• Push and hold [F-4•DEF] for 1 sec. to select the default
setting.
t Push [EXIT/SET] to return to scan menu.
ON
• ON : Scan skips the programmed memory channel
in the skip memory bank while scanning (de-
fault)
• OFF : Skip function OFF
[AUTO] Long Push
• ON : Auto memory channels are cleared when
starting the auto memory write scan.
• [AUTO] Long Push
: Auto memory channels are cleared when
pushing and holding [AUTO]. (default)
• OFF : Auto memory channels must be cleared man-
ually and auto memory write scan stops when
100 channels (A00 to A99) are wrote.
ON
• ON : When starting a scan, scan screen appears
automatically. (default)
• OFF : Scan screen does not appear until [F-
5•SCAN] is pushed.
8-4