Icom IC-R9500 Instruction Manual page 130

11
SET MODE
■ Level set mode
(AM)
Turns the AF high cut filter circuit ON and OFF in AM
mode. (default: OFF)
(SSB)
Turns the AF high cut filter circuit ON and OFF in SSB
mode. (default: ON)
(CW)
Turns the AF high cut filter circuit ON and OFF in CW
mode. (default: ON)
(FSK)
Turns the AF high cut filter circuit ON and OFF in FSK
mode. (default: ON)
(P25)
Turns the AF high cut filter circuit ON and OFF in P25
mode. (default: ON)
Speech Level
Sets the voice synthesizer audio output level from 0 to
100% in 1% steps. (default: 50%)
Beep Level
Sets the key-touch beep output level from 0 to 100%
in 1% steps. (default: 50%)
Beep Level Limit
Turns the key-touch beep output level limiting capa-
bility from ON and OFF. (default: ON)
Phones Level Ratio
Sets the ratio for audio output level from the head-
phone to the internal speaker from 0.60 to 1.40 range
in 0.01 steps. (default: 1.00)
(continued)
OFF
ON
ON
ON
ON
ON
11-6
50 %
50 %
1.00