Authorizing Access Points (Gui) - Cisco IOS XE Release 3SE Configuration Manual

Authorizing Access Points (GUI)

Command or Action
Step 4
username user_name mac aaa attribute list list_name
Example:
Switch(config)# username aaa.bbb.ccc mac aaa attribute
list attrlist
Step 5 aaa new-model
Example:
Switch(config)# aaa new-model
Step 6
aaa authorization credential-download auth_list local
Example:
Switch(config)# aaa authorization credential-download
auth_download local
Step 7 aaa attribute list list
Example:
Switch(config)# aaa attribute list alist
Step 8 aaa session-id common
Example:
Switch(config)# aaa session-id common
Step 9
aaa local authentication default authorization default
Example:
Switch(config)# aaa local authentication default
authorization default
Step 10 show ap name Cisco_AP config general
Example:
Switch(config)# show ap name AP01 config general
Authorizing Access Points (GUI)
Step 1 Choose Configuration > Security > AAA > AP Policy.
The AP Policy page is displayed.
Step 2 In the Policy Configuration area, enable or disable the following parameters:
• Authorize LSC APs against Auth-List
• AP with Self-Signed Certificate
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
58
Converting Autonomous Access Points to Lightweight Mode
Purpose
Configures the MAC address of an access point
locally.
Enables new access control commands and
functions.
Downloads EAP credentials from the local server.
Configures AAA attribute list definitions.
Configures the AAA common session ID.
Configures the local authentication method list.
Displays the configuration information that
corresponds to a specific access point.
OL-28697-01