Connecting Access Points - Cisco Catalyst 3750G Getting Started Manual

Connecting Access Points

After you have configured the controller, use Category-5, -5e, -6, or -7 Ethernet cables to connect
Cisco lightweight access points to the network.
As soon as the controller is operational, it starts to scan for access points. When it detects one, it
records the its MAC address in its database. The controller RRM feature then automatically configures
the access point to start sending and allowing clients to associate.
Network
For the integrated wireless LAN controller, access points can operate only in Layer 3 Lightweight
Access Point Protocol (LWAPP) mode.
You have prepared the controller for basic operation. See the Cisco Wireless LAN Controller
Configuration Guide, Release 4.0 or later, for information on configuring the controller to meet the
specific needs of your wireless network.
22
SYST
RPS
MASTR
ST A T
DUPLX
SPEED
ST ACK 1
2
PoE
1X
2X
Cisco
Access Points
Cat alys t
375 0G
3 Wir eles SERIE S PoE -24
4 s LAN Con
5 6 trol ler
7 8
9 10
11 12
11X
13 14
15 16
13X
17 18
19 20
21 22
23
24
23X
12X
14X
25
24X