C H A P T E; Configuring Link Latency; Finding Feature Information; Prerequisites For Configuring Link Latency - Cisco IOS XE Release 3SE Configuration Manual

Lightweight access point configuration guide, cisco ios xe release 3se (catalyst 3650 switches)

Table of Contents

•

• The switch displays the current round-trip time as well as a running minimum and maximum round-trip

• You can configure link latency for a specific access point using the switch GUI or CLI or for all access

• Link latency calculates the Control and Provisioning of Wireless Access Points (CAPWAP) response

OL-28697-01

Finding Feature Information, page 81

Prerequisites for Configuring Link Latency, page 81

Restrictions for Configuring Link Latency, page 81

Information About Configuring Link Latency, page 82

How to Configure Link Latency, page 83

How to Configure TCP MSS, page 86

Performing a Link Test (CLI), page 87

Configuration Examples for Configuring Link Latency, page 88

time. The minimum and maximum times continue to run as long as the switch is up or can be cleared

and allowed to restart.

points joined to the switch using the CLI.

time between the access point and the switch. It does not measure network latency or ping responses.

Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)

C H A P T E R

Table of Contents

Catalyst 3650 series