Monitoring Wips Information - Cisco IOS XE Release 3SE Configuration Manual

Monitoring wIPS Information

• Monitor
Step 4 From the AP Sub Mode drop-down list, choose WIPS.
Step 5 Click Apply.
Step 6 Click Save Configuration.
Monitoring wIPS Information
Note The procedure to perform this task using the switch GUI is not currently available.
SUMMARY STEPS
1. show ap name Cisco_AP config general
2. show ap monitor-mode summary
3. show wireless wps wips summary
4. show wireless wps wips statistics
5. clear wireless wips statistics
DETAILED STEPS
Command or Action
Step 1 show ap name Cisco_AP config general
Example:
Switch# show ap name AP01 config general
Step 2
show ap monitor-mode summary
Example:
Switch# show ap monitor-mode summary
Step 3
show wireless wps wips summary
Example:
Switch# show wireless wps wips summary
Step 4 show wireless wps wips statistics
Example:
Switch# show wireless wps wips statistics
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
40
Configuring Adaptive Wireless Intrusion Prevention System
Purpose
Displays information on the wIPS submode on the
access point.
Displays the wIPS optimized channel scanning
configuration on the access point.
Displays the wIPS configuration forwarded by NCS
or Prime to the switch.
Displays the current state of wIPS operation on the
switch.
OL-28697-01