Table of Contents
Advertisement
Using Cisco Workgroup Bridges
SUMMARY STEPS
1. enable
2. debug iapp all
3. debug iapp error
4. debug iapp packet
5. debug mobility handoff [switch switch_number]
6. debug dhcp
7. debug dot11 mobile
8. debug dot11 state
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch# enable
Step 2
debug iapp all
Example:
Switch# debug iapp all
Step 3
debug iapp error
Example:
Switch# debug iapp error
Step 4
debug iapp packet
Example:
Switch# debug iapp packet
Step 5
debug mobility handoff [switch switch_number]
Example:
Switch# debug mobility handoff
Step 6
debug dhcp
Example:
Switch# debug dhcp
Step 7
debug dot11 mobile
Example:
Switch# debug dot11 mobile
OL-28697-01
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Debugging WGB Issues (CLI)
Purpose
Enters privileged EXEC mode.
Enables debugging for IAPP messages.
Enables debugging for IAPP error events.
Enables debugging for IAPP packets.
Enables debugging for any roaming issues.
Debug an IP assignment issue when DHCP is used.
Enables dot11/mobile debugging. Debug an IP
assignment issue when static IP is used.
67
Advertisement
Table of Contents
