Configuration Examples For Configuring Access Point Retransmission Interval And Retry Count; Viewing The Capwap Retransmission Details: Example; Viewing Maximum Transmission Unit Information: Example - Cisco IOS XE Release 3SE Configuration Manual

Configuring Retransmission Interval and Retry Count
The All APs page is displayed.
Step 2 Click the AP name.
The AP > Edit page is displayed.
Step 3
Click the Advanced tab.
The CAPWAP MTU field shows the CAPWAP maximum retransmission unit information.
Configuration Examples for Configuring Access Point
Retransmission Interval and Retry Count

Viewing the CAPWAP Retransmission Details: Example

Enter the following command:
Switch# show ap capwap retransmit
Global control packet retransmit interval : 3
Global control packet retransmit count : 5
AP Name
--------------------------------- -------------------------------
--------------------------------
3602a

Viewing Maximum Transmission Unit Information: Example

This example shows how to view the maximum transmission unit (MTU) for the CAPWAP path on the switch.
The MTU specifies the maximum size of any packet (in bytes) in a transmission:
Switch# show ap name cisco-ap-name config general | include MTU
CAPWAP Path MTU.................................. 1500
OL-28697-01

Configuration Examples for Configuring Access Point Retransmission Interval and Retry Count

Retransmit Interval
5
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Retransmit Count
3
35