Prerequisites For Using The Web Gui; Information About Using The Web Gui; Web Gui Features - Cisco IOS XE Release 3SE Configuration Manual

Using the Web Graphical User Interface
•
•
•
•
•
•

Prerequisites for Using the Web GUI

• The GUI must be used on a PC running Windows 7, Windows XP SP1 (or later releases), or Windows
• The switch GUI is compatible with Microsoft Internet Explorer version 10.x, Mozilla Firefox 20.x, or

Information About Using The Web GUI

A web browser, or graphical user interface (GUI), is built into each switch.
You can use either the service port interface or the management interface to access the GUI. We recommend
that you use the service-port interface. Click Help at the top of any page in the GUI to display online help.
You might need to disable your browser's pop-up blocker to view the online help.

Web GUI Features

The switch web GUI supports the following:
The Configuration Wizard—After initial configuration of the IP address and the local username/password or
auth via the authentication server (privilege 15 needed), the wizard provides a method to complete the initial
OL-28697-01
Prerequisites for Using the Web GUI, page 13
Information About Using The Web GUI, page 13
Connecting the Console Port of the Switch , page 15
Logging On to the Web GUI, page 15
Enabling Web and Secure Web Modes , page 15
Configuring the Switch Web GUI, page 16
2000 SP4 (or later releases).
Google Chrome 26.x.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
2
C H A P T E R
13