Monitoring Access Point Join Information (Cli) - Cisco IOS XE Release 3SE Configuration Manual

Configuring the Switch for Access Point Discovery
Command or Action
Step 4
end
Example:
Switch(config)# end
Step 5 show ap config global
Example:
Switch# show ap config global
Step 6 show ap name Cisco_AP config general
Example:
Switch# show ap name AP03 config general

Monitoring Access Point Join Information (CLI)

Note The procedure to perform this task using the switch GUI is not currently available.
SUMMARY STEPS
1. enable
2. show ap join stats summary
3. show ap mac-address mac_address join stats summary
4. show ap mac-address mac_address join stats detailed
5. clear ap join statistics
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch# enable
Step 2
show ap join stats summary
Example:
Switch# show ap join stats summary
OL-28697-01
Purpose
Returns to privileged EXEC mode. Alternatively, you can also press
Ctrl-Z to exit global configuration mode.
Displays the global syslog server settings for all access points that
join the switch.
Displays the syslog server settings for a specific access point.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Monitoring Access Point Join Information (CLI)
Purpose
Enters privileged EXEC mode.
Displays the MAC addresses of all the access points that are
joined to the switch or that have tried to join.
23