Viewing Capwap Maximum Transmission Unit Information (Cli); Viewing Capwap Maximum Transmission Unit Information (Gui) - Cisco IOS XE Release 3SE Configuration Manual

Viewing CAPWAP Maximum Transmission Unit Information (CLI)

Viewing CAPWAP Maximum Transmission Unit Information
(CLI)
SUMMARY STEPS
1. enable
2. show ap name Cisco_AP config general
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch# enable
Step 2 show ap name Cisco_AP config general
Example:
Switch# show ap name Maria-1250 config
general | include MTU
Viewing CAPWAP Maximum Transmission Unit Information
(GUI)
Step 1 Choose Configuration > Wireless > Access Points > All APs.
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
34
c) Click the Advanced tab.
d) In the AP Retransmit Config Parameters area, enter the values for the following AP Retransmit
Count and AP Retransmit Interval parameters:
• AP Retransmit Count—Number of times you want the access point to retransmit the request
to the switch. The valid range is between 3 and 8.
• AP Retransmit Interval—Duration between the retransmission of requests. The valid range
is between 2 and 5.
e) Click Apply.
f) Click Save Configuration.
Configuring Retransmission Interval and Retry Count
Purpose
Enters privileged EXEC mode.
Displays the maximum transmission unit (MTU) for the
CAPWAP path on the switch. The MTU specifies the maximum
size of any packet (in bytes) in a transmission.
OL-28697-01