Removing Hot-Plug Pci Boards - Fujitsu PRIMERGY RX600 S3 Operating Manual

PCI boards
8.5.1

Removing Hot-plug PCI Boards

Ê Open the cover (see
Ê If required by the operating system (e.g. Windows 2000), start the PCI hot-
plug software (PCI Card HotReplace). You will find operating instructions in
the file "README for the PCI Hot Plug Software V3.0" on the ServerStart CD.
2
Figure 32: Deactivating a PCI board
Ê Deactivate the PCI board using by pressing the attention button (1, see
figure 32) on the board.
The attention button (1) and the power indicator (2, LED) for the hot-plug PCI
slot flash orange while the slot is in the disable sequence.
Ê Wait until the power indicator (2) goes out.
The slot is now powered off.
Ê If there are any cables connecting the PCI board, remove them carefully.
90
"Opening/Closing the Casing" on page
1
Hot-plug Components
98).
U41662-J-Z156-1-76