Opening/Closing The Casing - Fujitsu PRIMERGY RX600 S3 Operating Manual

Opening/Closing the Casing

8.6 Opening/Closing the Casing
V
CAUTION!
The actions described in these instructions should only be
performed by technical specialists. Equipment repairs should only
be performed by authorized, qualified staff. Any unauthorized
openings and improper repairs could expose the user to risks
(electric shock, energy hazards, fire hazards) and could also
damage the equipment.
Please observe the safety information in
on page 19.
V
CAUTION!
The cover must be reinstalled as soon as possible due to cooling, to
comply with applicable EMC regulations (regulations on electromagnetic
compatibility) and to protect against fire.
Figure 38: Opening the casing
Ê To open the casing, release the two captive screws (1) on the front, push the
cover by 1 - 2 centimeters in the direction of the arrow and take the cover off.
Ê To close the casing, put the cover on top of the casing and push it towards
the front until it stops. Finally, tighten the two captive screws (1) again.
98
Hot-plug Components
chapter "Important Notes"
1
U41662-J-Z156-1-76
1