Fujitsu PRIMERGY RX600 S3 Operating Manual page 89

Hot-plug Components
7 6 5 4 3
Figure 31: PCI slots with and without hot-plug functions
I
Hot-plug functions are only available for hot-plug PCI boards that are
inserted in the PCI slots 1 - 5 (green retention latches, see
The PCI slots 6 and 7 (blue retention latches in
plug use. The server must be switched OFF, before any PCI boards may
be replaced or inserted additionally in these slots. This procedure is
described in the Options Guide and in the Service Supplement, respec-
tively.
U41662-J-Z156-1-76
2 1
PCI boards
figure
figure 31) are not for hot-
31).
89