Fujitsu PRIMERGY RX600 S3 Operating Manual page 62

Switching the Server ON and OFF
Switching the Server OFF (non ACPI-compatible Operating Systems)
Power-on indicator lights green (position 7 in
Ê Shut down the operating in an orderly manner.
The server remains switched ON and the power-on indicator remains green.
Ê Press the ON/OFF button (position 10 in
of the possibilities described in
The server switches OFF and the power-on indicator is dark.
Other ON/OFF Possibilities
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
– Specified switch-On time/switch-OFF time
The server is automatically switched ON or OFF at a time specified in the
ServerView program.
– Ring indicator
The server is switched ON via an internal or external modem.
– Wakeup On LAN (WOL)
The server is switched ON by a command via the LAN.
– After power failure
The server automatically switches ON following a power failure (depending
of the settings in the BIOS).
– Power override function
The system may be switched OFF "unconditionally" by pressing the ON/OFF
button for about 4 to 5 seconds.
V
CAUTION!
Data loss may occur!
– IPMI
The server is switched ON by an IPMI console (via the serial COM1 port or
via the RJ45 LAN port).
62
Commissioning and Operation
figure 14 on page
figure 14 on page
"Other ON/OFF Possibilities" on page
49).
49) or use one
62.
U41662-J-Z156-1-76