Overview Of Installation Steps - Fujitsu PRIMERGY RX600 S3 Operating Manual

2

Overview of Installation Steps

This chapter provides an overview of the steps involved in installing your server.
You will find further information on the relevant installation steps in the refer-
enced sections.
Ê First of all, carefully read the safety information in the
Notes" on page
Ê Transport the server to the desired installation location.
Ê Unpack all individual parts, check them for any damage during transport and
check whether the delivery agrees with the details on the delivery sheet (see
section "Unpacking the Server" on page
Ê Ensure that all of the necessary manuals (see
the Server Documentation" on page
PDF files.
Ê Install the server into the rack (see
into the Rack" on page
Ê Attach the cables to the server. Before doing this, read the
"Connecting Devices to the Server" on page 43
Connecting/Disconnecting Cables" on page
Ê Connect the server to the power system (see
to the Mains Voltage" on page
Ê Familiarize yourself with the operating and indicator elements on the front
and back of the server (see
page 49).
Ê Configure the server and install the desired operating system and applica-
tions. You can do this in two ways:
– Remote configuration and installation using ServerStart:
The ServerStart CD provided is an effective way of configuring the server
and installing the operating system.
To find out how to operate ServerStart and for further information, refer to
the manual "ServerView Suite - ServerStart" provided as a PDF file.
You will find information on configuration in the
with ServerStart" on page
U41662-J-Z156-1-76
19.
33).
45).
section "Operating and Indicator Elements" on
64.
32).
"Additional Components of
6) are to hand; if necessary, print the
section "Installing/Removing the Server
and the
47.
section "Connecting the Server
section "Configuration
chapter "Important
section
section "Hints:
17