Multiple-Up - Xerox 4110 User Manual

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
No Separators + N Sets
Copies are made on transparencies and only the required number
of copies for distribution is printed.
Depending on your selection, the following options may appear:
Paper Tray Settings
Displays the Transparency Separators - Paper Tray Settings
screen. Select each paper tray to use.
NOTE: Transparency Separators - Paper Tray Settings screen
will not display if No Separators is selected.
From Transparency size/orientation, select transparency size
and orientation. From Separators/N sets Tray or N sets Tray,
select the tray to be used. Select trays with paper of the same size
and orientation for the transparency and the separators
(N Sets).

Multiple-Up

Two, four, or eight sheets of original documents can be copied
together onto a single sheet of paper.
When you select Multiple Up, Auto% or Reduce/Enlarge is
selected automatically. The machine automatically sets the copy
ratio and makes copies of the images so that they fit on the
selected paper.
NOTE: Image loss may occur depending on the image size of the
document.
When Border Erase is set, border erase is executed for
each document copied to the whole document.
When Image Shift is set, shift is executed on the whole
document. For this reason, image loss may occur
depending on the document image size of the document.
Select the other than Auto for the paper tray of Paper
Supply on the Basic Copying screen.
2. Co p y
2-59