10 . M ai n te n an c e
10 - 1 2
D2 Finisher
If you have the D2 Finisher, follow this procedure to replace the
staple cartridge.D Finisher
1.
Make sure that the machine has stopped, and then open the
right cover on the finisher.
Hold the UR1 at the position shown in the illustration and lift it
2.
slightly.
Pull out the staple cartridge.
3.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e