List Of Options - Xerox 4110 User Manual

12 . Sp ec i fi c a ti o n s

List of Options

Product name
Optional High Capacity
Feeder (HCF)
Oversized High Capacity
Feeder (OHCF)*
*Not available with the 4590
Copier/Printer
Folder Module
Booklet Maker
Printer Upgrade Kit
Mobility Plates
Data Security Kit
Network Accounting Kit
(Job Base Account Kit)
12 - 1 8
The following are the principal options available. To purchase
these, contact the Customer Support Center.
Allows you to load papers on tray 6 and 7. A wing table to put
documents on comes with this product.
1 tray feeding device (Tray 6) that accommodates large stock
sizes including 8.5 x 11 in /A4 up to 13 x 19 in. If installed, this
unit replaces any existing HCF.
Enables you to output Z-folded copies.
Note: It is available when Finisher D or Finisher D2 or Booklet
Finisher D or Booklet Finisher D2 is installed.
This option allows you to create Booklets with or without
saddle stitching and bi-fold. This option is available on both the
D and D2 finishers.
Allows a DC (copier only) machine to be updated to a ST
(Network Print) enabled system
These plates allow the Xerox 4110 system to be installed on
uneven floor or heavy carpet.
This kit increases the security of data written to the hard disk.
Allows you to keep track of the user accounts via an external
authentication server.
NOTE: The products are liable to change.
For the latest information, contact the Customer Support
Center.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e
Description