Load Paper In The Trays; Load Paper In Trays 1 And 2 - Xerox 4110 User Manual

7. P a p er an d O t he r Me d ia

Load paper in the trays

Load paper in Trays 1 and 2

7- 4
About types of paper loaded in trays
The machine automatically detects the size and orientation of
loaded paper in trays. The paper type, however, must be set.
Normally, plain paper is set to each of the trays. Change the paper
type settings if you load other paper types. Paper can also be
named and set as user-defined paper. Up to five paper types can
be set as user-defined paper.
For details about changing paper type, refer to "Paper Tray
Attributes" in the System Administration Guide.
About automatic tray selection
Automatic tray selection is active if Auto is selected for Auto
Paper Select (Type). If the machine judges that there are two or
more corresponding trays in automatic tray selection, the machine
gives higher priority to the tray having the highest Paper Type
Priority set at Paper Tray Settings. During automatic tray
selection, trays whose Paper Type Priority setting is set to Off
are not targeted in Automatic Tray Selection. Also, if the Paper
Priority setting is exactly the same, automatic tray selection is
determined by Tray Priority.
NOTE: Tray 5 (Bypass) cannot be selected in automatic tray
selection.
For information about setting Paper Type, Paper Type Priority,
Paper Tray Priority, and setting the paper substitute feature, refer
to "Paper Tray Settings" in the System Administration Guide. The
same settings can also be made from CentreWare Internet
Services. See your System Administrator for help.
When the machine runs out of paper during copying or printing, a
message is displayed on the Control Panel display. Add paper
according to the displayed instructions. Copying or printing is
automatically resumed when paper is added.
Pull out the tray towards you until it stops.
1.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e