Xerox 4110 User Manual page 425

Category
Error Code
Message
C P S M O
A malfunction
occurred.
Power-cycle
the machine.
(xxx-yyy)
Completed
with an error.
(xxx-yyy)
A fault has
occurred. The
machine has
rebooted.
Select Close.
When in doubt,
report the
malfunction to
our Call
Center.
(xxx-yyy)
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Remedies are described in this section for situations in which the
following messages are displayed.
Cause and Remedy
An error occurred.
Cause
Turn off the power, wait until the Control Panel display
Remedy
goes dark and then turn on power again.
If the message persists, record the displayed contents
for (xxx-yyy). Switch off the machine immediately, wait
for the Control Panel display to go dark and contact the
Customer Support Center.
An error occurred and the job completed.
Cause
Retry operation after waiting for a period.
Remedy
An auto-recoverable internal error occurred and the
Cause
machine restarted automatically.
Select the Close button. The machine is operating
Remedy
normally now. If the error persists, call contact the
Customer Support Center.
11 . P r o b le m S o l vi n g
11-47