Xerox 4110 User Manual page 384

11 . P r ob l e m S ol v i n g
Symptoms
Copies are not
made at the
desired size.
11 - 6
Check
Is the document scanning
glass or the document cover
dirty?
Is the document made of
highly transparent material
like a transparency?
Is the document at the
correct position?
Is the document loaded
correctly?
Is the document guides at
the correct position?
Is the document folded or
bent?
Is the document a
non-standard size?
Remedy
Clean the document feeder glass or the
document cover.
Refer to "Cleaning the Document Cover
and Document Glass" on page 10-19.
Place the document on the document
glass, and place a white sheet on top of the
document before making a copy.
Load the document correctly.
Refer to "Step 1 Load Documents" on
page 2-1.
Properly set the document guides.
Refer to "Step 1 Load Documents" on
page 2-1.
Straighten and properly reset the
document.
Refer to "Step 1 Load Documents" on
page 2-1.
Enter the document size.
Refer to "Original Size" on page 2-36.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e