Xerox 4110 User Manual page 111

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Uncollated
The machine can output the specified number of copies and sort
sheets by page.
Staple Position
You can set the position for stapling. If you select More..., the
Copy Output - Stapling screen displays.
NOTE: The number of pages that can be stapled is 2 to 50
(P paper) when the Staple cartridge for 50 sheets XB is installed.
The number is 2 to 100 (P paper) when the Staple cartridge for
100 sheets XA is installed. Plain paper, recycled paper, lightweight
paper, heavyweight paper 1, side 2 paper, punched paper, tab
paper 1, and custom paper 1 to 5 can be stapled.
Punch Position
You can set the position for punching. If you select More..., the
Copy Output - Punching screen displays.
Z-Fold
You can output Z-folded copies. Available paper sizes for Z-folding
are B4, A3 and 11 X 17."
When loading mixed size documents, load only the documents
with the same length for the edge to be inserted. For example,
load 8.5 x 11 in./A4 portrait and A3, or B5 portrait and B4. When
you load an 8.5 x 11 in./A4 portrait sheet with an A3 sheet, the
only A3 copy will be
Z-folded.
KEY POINT: An optional package is necessary for this selection.
For more information, contact the Customer Support Center.
2. Co p y
2-83