Xerox 4110 User Manual page 383

Symptoms
Online indicator
does not light
even though you
instructed it to
print.
Printing is not
performed even
though printing
was instructed
on Tray 5
(Bypass).
Unsatisfactory
print quality.
Text is not
printed correctly
(text is
corrupted).
Online indicator
lights and copies
are not delivered
with Online still
lit.
Cannot open or
close trays.
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Check
Is the interface cable
disconnected?
Is the environment correctly
set on the personal
computer?
Is the required interface
set?
Is paper of the size
specified for printing loaded
on the tray?
A probable cause is an
image defect.
Non-standard fonts are
used for printing.
Data remaining in machine
memory.
Did you open a cover or turn
power off during printing?
Remedy
Turn the power switch off, unplug the
power cord from the power outlet, and
check the interface cable connection.
For information about network settings,
refer to the System Administration Guide.
Check the print driver and other
environment settings on the personal
computer.
Check the status of the interface port in
use.
For information about network settings,
refer to the System Administration Guide.
Follow the instructions displayed to load
paper of correct size and instruct it to print
again.
Refer to "Load paper in Tray 5 (Bypass)"
on page 7-6.
Remedy the trouble referring to Image
Quality Trouble described later.
Refer to "Image Quality Problems" on
page 11-9.
Check the application or print driver
settings.
Cancel printing, or purge remaining data.
Refer to "Checking Current/Pending Jobs"
on page 8-3.
Turn the power off without unnecessarily
closing or opening a paper tray. Wait
several seconds and then turn the power
switch on. Make sure that the machine is
online (ready to receive data) and then
close or open the paper tray.
11 . P r o b le m S o l vi n g
11-5