Xerox 4110 User Manual page 483

Staple
Punching
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Item
Sizes suitable for
stapling
Maximum staple
pages
Staple position
Paper type
Size suitable for
punching
Paper type
Specification
• 8.5 x 11"/A4 (SEF), 8.5 x 11"/A4 , 11 x17"/A3, 7
x 10"/B5 , 10 x 14"/B4, 8.5 x 13", 8.5 x 14"
• 8K, 16K
• Non-standard size:
• Y direction: 8-11.7"/203-297 mm
• X direction: 13-17"/182-432 mm
• With staple cartridge for 100 sheets: 100 sheets
• With staple cartridge for 50 sheets: 50 sheets
• With staple cut (D2 Finisher): 100 sheets
Important: Becomes 65 sheets only for paper larger
than A4 or 8.5 X 11" size on D Finisher.
Staple cartridge for 50 sheets is optional.
Applicable when using Xerox 20 lb./75 g/m
1 place (front/inner at an angle), 2 places (parallel)
Important: Angled stapling is possible only for 8.5 x 11
in./A4 and 11 x 17 in./A3 sheets. Stapling other than
8.5 x 11 in./A4 and 11 x 17 in./A3 sheets is parallel to the
paper edge.
2
13-43 lb./52 to 162g/m
USA/Canada:
• 2 holes:
• 8.5 x 11"/A4 (SEF), 8.5 x 11"/A4 , 11 x 17"/A3
(SEF), 7 x 10"/B5 , 10 x 14"/B4, 8.5 × 13", 8.5
× 14", 11 × 17"
• 8K, 16K , tab paper (8.5 x 11"/A4 )
• 3 holes:
• 8.5 x 11"/A4 , 11 x 17"/A3
• 8K, 16K , tab paper (8.5 x 11"/A4 )
XE:
• 2 holes:
• 8.5 x 11"/A4 (SEF), 8.5 x 11"/A4 , 11 x 17"/A3
(SEF), 7 x 10"/B5 , 10 x 14"/B4, 8.5 × 13", 8.5
× 14", 11 × 17"
• 8K, 16K , tab paper (8.5 x 11"/A4 )
• 4 holes:
• 8.5 x 11"/A4 , 11 x 17"/A3
• 8K, 16K , tab paper (8.5 x 11"/A4 )
2
13-53 lb./52-200g/m
1 2. Sp ec i f ic a t io n s
2
paper.
12-11