Replacing The Staple Cartridge; D Finisher - Xerox 4110 User Manual

Replacing the Staple Cartridge

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
A message appears on the display when it is time to replace a
staple cartridge.
KEY POINT: The use of staple cartridges not recommended by
Xerox may impair quality and performance. Use only staple
cartridges recommended by Xerox for the machine.
NOTE: To order a staple cartridge, contact the Customer Support
Center.

D Finisher

If you have a D Finisher, follow this procedure to replace the
staple cartridge.
1. Make sure that the machine has stopped, and then open the
right cover on the finisher.
Hold the UR1 at the position shown in the illustration and lift it
2.
slightly.
1 0. M a i nt en a nc e
10-9