Xerox 4110 User Manual page 419

Category
Error Code
C P S M O
027-737
027-739
027-740
027-741
027-742
027-743
027-744
027-745
027-746
027-750
027-751
027-752
027-753
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Cause and Remedy
An error occurred while reading data from the job
Cause
template pool server.
Check to see whether you have privileges for the
Remedy
directory storing the job template.
Unable to find the specified job template server.
Cause
Check the path name for the job template server.
Remedy
Unable to login to job template server.
Cause
Check the login user name and password.
Remedy
Unable to connect to job template server.
Cause
Have the network administrator check the network and
Remedy
server environments.
Unable to store job template due to insufficient hard disk
Cause
space.
Remove unnecessary data from the hard disk to
Remedy
increase free disk space.
The specified job template server is incorrect.
Cause
Check the settings for the job template server.
Remedy
There is a problem in the domain name of the job
Cause
template server.
Make sure that the DNS server connection and the
Remedy
domain name are registered to the DNS server.
The address of the DNS server is not registered on the
Cause
machine.
Either register the address of the DNS server on the
Remedy
machine or set the address of the job template server by
an IP address.
The specified job template pool server protocol settings
Cause
are incorrect.
Set up the correct port.
Remedy
Attempted to command a print job to a scanned
Cause
document.
Scanned document cannot be printed. Configure the job
Remedy
flow correctly.
When following the job flow, an error occurred.
Cause
Check the settings for the job flow.
Remedy
In a job flow, a job start was specified before a required
Cause
item was input.
Configure a default to input the required item in the job
Remedy
flow or change the job flow to have the required item link
to the mailbox.
The necessary port for the job flow is either not enabled
Cause
or is unavailable.
Have your System Administrator check the port status.
Remedy
11 . P r o b le m S o l vi n g
11-41