Error 116-771...127-221 - Xerox 4110 User Manual

Category
Error Code
C P S M O
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-790
116-780
123-400
127-210
127-211
127-212
127-213
127-220
127-221
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Cause and Remedy
There was a problem with parameters in the JBIG data.
Cause
They were automatically edited.
If any problem occurs in job result, try to process the job
Remedy
again.
There is a problem with the document attached to the
Cause
received mail.
Check the attached document.
Remedy
A malfunction occurred in the machine.
Cause
Power-cycle the machine. If the machine error is not
Remedy
fixed by performing the relevant remedy, contact the
Customer Support Center.
Communication error between the printer and the
Cause
controller. Error detected by the printer.
Remove and reinsert the cable connection between the
Remedy
printer and the controller. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center.
Detected a communication error between the printer and
Cause
the controller.
Remove and reinsert the cable connection between the
Remedy
printer and the controller. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center.
Detected an internal print check error by the controller.
Cause
Remove and reinsert the command/video cable between
Remedy
the controller and the printer. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center.
Detected a mismatch with the software version of the
Cause
controller.
Contact the Customer Support Center for information
Remedy
and/or instructions to remedy the problem.
Detected a communication error of the video system by
Cause
the controller.
Remove and reinsert the cable connection between the
Remedy
printer and the controller. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center
Detected a communication error by the controller.
Cause
Remove and reinsert the cable connection between the
Remedy
printer and the controller. Power off and on both the
printer and the controller. If the problem persists, call the
Customer Support Center.
11 . P r o b le m S o l vi n g
11-45