Set Time And Date - Intermec CK60 User Manual

Chapter 3 — Configuring the CK60 Computer

Set Time and Date

92
This command sets the date and time on the CK60 Computer. The
default date and time is June 1, 1999 at 12:00 AM .
From the network, send the following:
/+ yyyymmddhhmmss
where acceptable values for the date are:
0000-9999
yyyy
01-12
mm
01-31
dd
00-23
hh
00-59
mm
00-59
ss
You can also set the time and date by using the Date/Time control panel
applet. Tap Start > Settings > Control Panel, then double-tap the
Date/Time icon to configure the time and date.
Year
Month of the year
Day of the month
Hour
Minutes
Seconds
CK60 Series Handheld Computer User's Manual