Setting And Using Camera Presets (V700 System Only) - Polycom V500 Getting Started Manual

Setting and Using Camera Presets (V700 System Only)

© Polycom, Inc.
To open or close the privacy shutter on the V700 system:
 Move the slider to the right to close the privacy shutter, or to the left to
open it. You can still make and receive calls when the shutter is closed, but
the people at the far site cannot see you.
To adjust the camera focus on the V700 system:
 Focus the camera by turning the focus wheel:
Presets allow you to automatically point a far-site camera at pre-defined
locations in a room.
When you use the V700 system, you can create up to 16 presets (0-15) for the
far-site camera, if far-site camera control is allowed. These presets are saved
only for the duration of the call. You may also be able to use presets that were
created at the far site to control the far-site camera.
To move the far-site camera to a preset:
1. When you are in a call, press
2. Press a number on the remote control.
Getting Started Guide for the V Series
Far, then choose a far-site camera.
9