Showing Content - Polycom V500 Getting Started Manual

Getting Started Guide for the V Series

Showing Content

14
If you have the Polycom People+Content
on your computer, you can show content from any Windows XP or Windows
2000 computer that is connected to the network.
To keep the call secure, content is automatically stopped when a site is added to
the call.
To install the People+Content IP application on a computer:
1. On a computer with Windows XP or Windows 2000, open a web browser
and go to the Polycom web site at www.polycom.com/support/video.
2. Download and install the People+Content IP software.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS name of your video conferencing system and
the meeting password, if one is set.
3. Click Connect.
4. Open the content you want to show.
5. Click in People+Content IP.
If the shared content disconnects after five minutes and you receive a dialog box
indicating that the five-minute People+Content IP demonstration has timed out, you
must contact your Polycom sales representative to purchase a key code to activate
the full version of People+Content IP on your system.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Click in People+Content IP.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• Only one computer at a time can be connected to a Polycom system.
IP software application installed
™
© Polycom, Inc.